Library filed under Structural Failure from Europe

Burning wind turbine in Rhede (Germany)

A police spokesman reported that the fire initially broke out in the nacelle at around 3 o'clock on Friday morning and spread to the entire turbine. One blade of the wind turbine fell off after a short time while large parts of a second blade followed. Although the third blade did not burn, it threatened to fall after the nacelle was largely destroyed. 
12 Oct 2018

Wind turbine fire in the Fens

Fen_turbine_fire-cambsfirerescue_image4_thumb The incident involved one of 5 turbines at the Ransonmoor wind farm located in the Fens of Cambridgeshire. The project consists of 2 Senvion MM82 and 3 Gamesa G80 wind turbines for a total nameplate capacity is 10.1 MW. The Gamesa turbines were placed in sevrice in 2007; the Senvion turbines followed a year later in 2008. The damaged turbine was built by Gamesa.
30 May 2018

Massive damage in the wind farm - cause unclear

The damage at the offshore wind farm, "Alpha Ventus", located about 45 kilometers from Borkum, is considerably more serious than initially known. At the beginning of April not only did the plastic covering crash 90 meters into the sea, but half of the nacelle fell off as well. Experts are now investigating whether it is a single incident or possibly serial damage. More than 120 turbines of this type are installed in the North Sea.
25 Apr 2018

Enercon E-115 Turbine Failure

Enercon_e-115_-_1_thumb The citizens group, Gegenwind Borchen, shows on its website photos of fiberglass parts of shredded turbine blades scattered several hundred meters away. The fragments are from an Enercon E-115 turbine that experienced a catastrophic failure within days of the turbine being erected. The mayor of Borchen, Reiner Allerdissen, called for an immediate halt to construction at the facility until the cause of the failure is known. The turbine stands about 200 meters (656 feet) high.
10 Mar 2018

http://www.windaction.org/posts?location=Europe&topic=Structural+Failure
back to top