Pictures from USA
A wind turbine caught fire in southwest Taylor County in Texas. Crews worked through the night to contain the flames but it had already spread to 200 acres and was only contained by 50%. The fire appears to be caused by turbines at the Buffalo Gap wind energy facility located SSW of Mulberry Canyon. Buffalo Gap was built in three phases beginning in 2006. Phase I consists of 67 Vestas V80 turbines for a total capacity of 120.6 MW. Phases II and III include 155 GE SLE turbines and 74 Siemens turbines. The total installed capacity for the three phases is 523.2 MW. The fire is being called the Rhodes Ranch 3 fire. The Rhodes Ranch 1 fire, which happened in 2009 and burned 2000 acres, was also caused by a wind turbine. Buffalo Gap is owned and operated by AES Wind Energy.
A railroad bridge burns Thursday night (Aug. 2, 2018) in Arlington, Oregon. Firefighters said a wind turbine caught fire, sparking a blaze.
Wind-warped turbine sits still about a half mile north of E29 on Highway 65. One of the blades was bent like a rabbit ear due to storm-related winds that came through Central Iowa last week. It was the only one with this kind of damage in the pod of turbines.
Oklahoma Forestry Services reports that on March 28 a wind turbine two miles south of Weatherford caught fire, throwing sparks to the ground. The sparks caused a grass fire that was contained after growing to approximately five acres. Eight fire engines responded to the scene and were able to contain the fire.
Thick, black smoke fills the sky as a turbine burns in Weatherford Oklahoma. The turbine is part of NextEra's Weatherford Wind Energy Center commissioned in 2005. The project consists of 98 GE1.5sle (1.5MW) turbines for a total nameplate capacity of 147 MW.
DTE Energy's Sigel wind energy facility experienced another blade failure. Other blades have failed in recent years at the same project. The Sigel project is comprised of 40 GE 1.6-100 towers and was placed in service in October 2012.
This aerial picture taken by the National Oceanic and Atmospheric Administration shows how hurricane-force winds shredded one of the Vestas turbines at the Punta de Lima project in Puerto Rico. The Punta de Lima Wind facility, developed by Gestamp Wind, began operation in April 2013 and includes 13 Vestas 1.8 megawatt turbines for a total capacity of 23.4 megawatts.
Another turbine failure has been reported at Michigan's Deerfield wind facility in Huron County. The Deerfield project includes a mix of Vestas V110 2MW and 2.2MW machines for a total installed capacity of 150 MW. Two blades on separate turbines broke in half in late 2016 when the project was in the process of being commissioned. There was “an anomaly in the manufacturing process that resulted in a cavity in the blade shell support structure where the blades broke,” Vestas told reNEWS. Fifty blades in the 72-turbine facility shared the same flaw. No information is available on the cause of this recent failure.
The incident involved a 1.7 MW GE turbine at the Shannon (204 MW) wind facility outside of Windthorst TX which was placed in service December 2015.
One of the 44 GE 1.7 MW turbines sited at NextEra's Steele Flats wind facility suffered a catastrophic collapse. The 74.8-megawatt wind plant located in Jefferson and Gage Counties, Nebraska was placed in service in October 2013.
There was another fire at an operating wind plant in Texas. The turbine was part of the 174 MW Salt Fork Wind project, located in Donley and Gray Counties, east of Amarillo. The 87 Vestas V100 (2.0 MW) wind turbines was installed by EDF Renewables and placed into service in December 2016. EDF Renewables sold the facility to the Southern Company. Photos courtesy of Greg Hendricks.
A turbine at Nextera Energy's Breckinridge wind energy facility suffered a catastrophic blade failure which threw the blade at least 300 feet from the base of the tower. The Breckinridge facility which was place online in August 2015, uses 57 GE 1.7 megawatt XLE turbines. The site has a nameplate capacity of 98.1 megawatts.
This is a photosimulation of U.S. Wind's proposed offshore wind facility to be sited 12-miles off the coast of Maryland. U.S. Wind secured the lease rights to two locations off the coast of Ocean City. In total the company is seeking permission to erect up to 187 turbines (750 MW) within an 80,000-acre area.
This 100-foot turbine sited in Narragansett collapsed in winds over 50 miles per hour.
Iberdrola/Amazon Desert Wind project consists of 104 turbines for a total installed capacity of 208 megawatts. The landscape of North Carolina is now littered with massive turbines and 62 miles of access roads. Special thanks to Don Carrington for sharing his photos.
Another blade failure on a wind turbine recently occurred a couple miles south of Minden City on Minden Road in northern Sanilac County. Much of the blade has broken off. Work on replacing the blade will likely have to wait until Spring, leaving this unit out of service for some time.
Heritage Sustainable Energy lost a turbine to fire at the Stoney Corners Wind Farm located in parts of Missaukee and Osceola Counties, west of the City of McBain, Michigan. The project consists of 29 wind turbines at an installed capacity of 60.2 megawatts. Special thanks to Dianne Ziegler for allowing us to share her photos on the Windaction site.
Wind turbine #126 collapse at Pattern Energy's Ocotillo Express LLC on November 21, 2016. The 265 MW facility, operational since July 2013, consists of 112 German-made Siemens turbines. The Siemens 2.37 MW-108 stand about 500-feet tall.
A catastrophic fire destroyed one of the twelve Gamesa 2.0 MW wind turbines operating at the Bear Creek Wind Power Project. The facility, which is owned by Iberdrola, is located in Bear Creek Township near Wilkes-Barre in Luzerne County, Pennsylvania and was placed in service in 2006.